A pictoral representation of UIAA-101 and EN-892 standards for ropes.
9.4mm Stinger 70m Dry
Designed for high-level climbers, this is the single rope preferred for very hard routes. STRONG POINTS: • An incredible number of falls for its weight and so smooth running that it results in an appreciable increase in energy when clipping. USES: High grade climbers.
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
If you can’t see any buying options above, try turning off all ad-blocking plugins.
|Weight|| 59.0 g/m|
9.105 lbs / 4130 g
|Diameter (millimeters)||9.4 mm|
|Length (meters)||70 m|
|UIAA Falls (Single / Half / Twin)||6 / 00|
|Dynamic Elongation (Single / Half / Twin)||- / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||- / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.20 kN / 0.00 kN / 0.00 kN|
|Dry Treatment||Sheath (aka Dry Cover)|
|Sheath Proportion (%)||38.0 %|
|Sheath Slippage (mm)||0 mm|
|Rope End Marker||Yes|
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.