How to use 10.5mm Wall Master VI correctly, precautions, lifetime, care and maintenance with instructional pictures.
10.5mm Wall Master Unicore 200m
Designed specifically for the climbing wall environment - the thicker sheath associated with the Uni Core process makes for a tougher rope perfectly adapted to resist wear due to repeated belays and low impact falls. The astonishing Uni Core process permanently binds the sheath to the core of the rope radically decreasing the occurrence of slippage.
If you can’t see any buying options above, try turning off all ad-blocking plugins.
|Weight|| 71.0 g/m|
31.310 lbs / 14200 g
|Diameter (millimeters)||10.5 mm|
|Length (meters)||200 m|
|UIAA Falls (Single / Half / Twin)||7 / 00|
|Dynamic Elongation (Single / Half / Twin)||- / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||- / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.40 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)||47.0 %|
|Sheath Slippage (mm)||0 mm|
|Rope End Marker||None|
No voice, but the demo speaks for itself as Beal cuts a traditional rope and a Wall Master Unicore rope. The difference is certainly dramatic.
A pictoral representation of UIAA-101 and EN-892 standards for ropes.
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.