How to use 10.2mm Wall School correctly, precautions, lifetime, care and maintenance with instructional pictures.
10.2mm Wall School Unicore 200m
This new rope was specifically developed for indoor use in climbing gyms. The small diameter allows children to gain better handling and confidence knowing that this rope is perfectly adapted to them. Thick sheath allows greater resistance to abrasion. The UniCore process binds the sheath to the core of the rope preventing slippage. Spools ship with rope end markers for traceability. Three colors for rotation and station identification in your gym or camp. STRONG POINTS: • UniCore process eliminating sheath slippage. • Thick sheath offering better resistance to abrasion. • Thin diameter allowing better handling and knotability even by children. USES: Indoor
When you click a link below and then checkout online, no matter what you buy (climbing gear or not), we get a small commission that helps us keep this site up-to-date. Thanks!
If you can’t see any buying options above, try turning off all ad-blocking plugins.
|Weight|| 64.0 g/m|
28.219 lbs / 12800 g
|Diameter (millimeters)||10.2 mm|
|Length (meters)||200 m|
|UIAA Falls (Single / Half / Twin)||7 / 00|
|Dynamic Elongation (Single / Half / Twin)||36.0 % / 0.0 % / 0.0 %|
|Static Elongation (Single / Half / Twin)||8.5 % / 0.0 % / 0.0 %|
|Impact Force (Single / Half / Twin)||8.40 kN / 0.00 kN / 0.00 kN|
|Sheath Proportion (%)||40.0 %|
|Sheath Slippage (mm)||0 mm|
|Rope End Marker||None|
A pictoral representation of UIAA-101 and EN-892 standards for ropes.
The UIAA equipment standard provides a baseline for equipment performance in a test lab under controlled conditions on new equipment. Although these test conditions are relevant to the conditions encountered climbing, conditions encountered at the crags and the condition of the equipment are equally important. This recommendation from the UIAA member federation The British Mountaineering Council (BMC) provides vital equipment information that is NOT explicitly addressed in the standard, particularly failure modes of the equipment and recommendations for the use, inspection, maintenance, and retirement of equipment.