Collecting every piece of gear takes a little time.
We think it's worth the wait.

Nice choice!
Give us a moment to collect those options for you.

Cassin Laser CR Harness Front
  • Cassin Laser CR Harness Front
  • Cassin Laser CR Harness Back

Laser CR

Rating

no ratings

Description

Working from the minimalist design of the Laser, the new Laser CR incorporates the same advanced laminate construction and contoured cut, but delivers more versatile features like extra padding, adjustable leg loops and a haul loop. The waist and leg loops are constructed from laser cut webbing fixed to a laminated structure of 2-mm foam padding and soft 3-dimensional honeycomb mesh. Laminate construction designed to withstand the abrasion typical of big routes. The gear loops are stiffened to keep draws at the ready, the No Twist belay loop is great for piece of mind during belays and rappels, and the strong haul loop will trail a rope or anything else you need to drag behind.

Retail price

US$ 139.95
Weight (g)

Weight

In grams, the weight, as stated by the manufacturer/brand.

If there are differences in weight (due to multiple sizes or optional accessories) we'll list them here.

The default weight is the middle-most size, often this is size M.

424 g

M : 424 g / 15 oz

CAMP doesn't provide the weights for other sizes so we're working on gathering this info by hand, stay tuned!

Fit Men
Sizes XS, S, M, L, XL
Gear Loops

Number of Gear Loops

Gear loops are used to hold gear (quickdraws, cams, etc) onto your harness. 4 gear loops is most common.

0 - 1 Gear Loops

Most often on full body harnesses or guide/gym style harnesses.

2-3 Gear Loops

Mostly found on lighter harnesses made for [ski] mountaineering or high-end sport climbing where weight is a high priority.

4 - 5 Gear Loops

The standard/most common number for climbing harnesses. Perfect for sport and trad.

More Than 6 Gear Loops

Designed for long multi-pitch and big wall climbing, found on harnesses made to hold the maximum amount of gear.

Worth Considering

Occasionally, the number of gear loops will change on a harness model depending on the size. There could be 7 gear loops for the med/large but only 5 gear loops for the xsmall/small. In this case we list the highest number for the filters, and then write an explanation on the product page like, “Size S/XS can only fit 5 gear loops.”

4 Gear loops
Ice Clip Slots

Ice Clip Slot

Ice clipper slots are made to fit a carabiner that holds ice screws. These slots are generally only used by ice climbers but there is no disadvantage to having them on your harness.

Less than 40% of harnesses will have ice clipper slots. And those harnesses will usually have 2 or 4 slots, often located next to, or between, the gear loops.

No, 0
Belay / Tie-In One Loop
Waist Buckle Type Quick Adjust
Leg Buckle Type Quick Adjust
Drop Seat Yes
Haul Loop

Haul Loop

Trad climbers often look for a haul loop as they're intended to haul a rope (second line) or pack (while you climb the chimney).

A haul loop can also hold shoes or other accessories. Although not the intended use, it is also commonly used to hold a chalk bag.

Yes  (14kN)
Certification ­
Size Chart

XS
Waist : 61-71 cm / 24-28 in
Legs : 47-57 cm / 18.5–22.4 in
S
Waist : 68-78 cm / 26.8–30.7 in
Legs : 51-61 cm / 20.1–24 in
M
Waist : 75-85 cm / 29.5–33.5 in
Legs : 55-65 cm / 21.7–25.6 in
L
Waist : 82-92 cm / 32.3–36.2 in
Legs : 59-69 cm / 23.2–27.2 in
XL (will fit the lower range of XXL)
Waist : 89-99 cm / 35-39 in
Legs : 64-74 cm / 25.2–29.1 in

No reviews yet.

If you know of a good product video that should be here, let us know, and we'll put it up.

If you're looking for gear videos in general, check out our Vimeo and YouTube channels to see the newest gear.